AMIA ARCHIVE
https://www.amiaworld.net/phpBB3/

Question about Aurora
https://www.amiaworld.net/phpBB3/viewtopic.php?f=2&t=50789		 Page 1 of 1
Author:  Dead [ Mon, Sep 06 2010, 11:46 AM ]
Post subject:  Question about Aurora
What's this? It keeps popping out randomly and systematically killing my will to work with Aurora.

Image
Author:  Nekhy [ Mon, Sep 06 2010, 12:19 PM ]
Post subject:  Re: Question about Aurora
Did you recently swap any hardware or drivers? I used to get a similar error, although for different dll.
Author:  speedgrab [ Mon, Sep 06 2010, 12:21 PM ]
Post subject:  Re: Question about Aurora
happens to me when i click on various things tilesets, and placables
Author:  Selvec Darkon [ Mon, Sep 06 2010, 12:46 PM ]
Post subject:  Re: Question about Aurora
Right click on the toolset exe file, turn off desktop compistion. It's an issue with the ATI drivers not supporting older 3D methods. I forget the name of the particular technology used. Turn AI to standard, turn off desktop compesition when using the toolset, and if that doesn't work, downgrade to the lowest driver you can find for your card and try again.

Last driver I found that worked well if the newer cards was 10.3, and even that still had issues.
Author:  Dead [ Tue, Sep 07 2010, 4:50 AM ]
Post subject:  Re: Question about Aurora
Selvec Darkon wrote:
Right click on the toolset exe file, turn off desktop compistion. It's an issue with the ATI drivers not supporting older 3D methods. I forget the name of the particular technology used. Turn AI to standard, turn off desktop compesition when using the toolset, and if that doesn't work, downgrade to the lowest driver you can find for your card and try again.

Last driver I found that worked well if the newer cards was 10.3, and even that still had issues.


How do I do all this?
Author:  speedgrab [ Tue, Sep 07 2010, 15:48 PM ]
Post subject:  Re: Question about Aurora
find it
, right click and go into properties,
go into the sub tab named compatibilly
tick the box called disale desktop composistion
Author:  Dead [ Fri, Sep 10 2010, 15:17 PM ]
Post subject:  Re: Question about Aurora
There's no "disable desktop composition".
There's:

Image
Author:  Glyph [ Fri, Sep 10 2010, 15:51 PM ]
Post subject:  Re: Question about Aurora
vista or xp?

if its the former, google: how to enable full admin mode.
Author:  Dead [ Fri, Sep 10 2010, 17:55 PM ]
Post subject:  Re: Question about Aurora
xp
Author:  Dead [ Tue, Sep 14 2010, 16:10 PM ]
Post subject:  Re: Question about Aurora
bamp
Author:  Selvec Darkon [ Wed, Sep 15 2010, 2:02 AM ]
Post subject:  Re: Question about Aurora
Oh XP.

Right the issue is that your driver version doesn't support something or rather.
Whats your current driver and what video card are you using? Did you recently upgrade your driver or videocard in the last 3 months?
Author:  Dead [ Wed, Sep 15 2010, 20:56 PM ]
Post subject:  Re: Question about Aurora
im using ati 5750 HD, and no, i didnt update it recently.
Author:  Selvec Darkon [ Thu, Sep 16 2010, 10:00 AM ]
Post subject:  Re: Question about Aurora
HD5700 series then, same as me and it works fine on my system.
Drop back to Driver version 10.4, see if that helps.
Page 1 of 1 All times are UTC
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/